001 Autolevels Certification Service EQM>0,7 mm
Availability :
In stock
125,00€ IVA Escl.
The operations include a general revision of the instrument, the verification of the micrometric movements, the verification focusing groups, the cleaning and the alignment of the levels, the check of the compensator, a general cleaning and the calibration.
The execution of the certification is done using primary samples generated by a Breithaupt collimator, model Jusko, with an incremental reticle tested and certified by UKAS and ACCREDIA.
All tests are made according to the calibration procedures indicated for the calculation of the instrumental precision and its relative measurement uncertainty.
I più visti
009 Interior Laser Certification Service
90,00€ IVA Escl.
009 Interior Laser Certification Service
90,00€ IVA Escl.
The operations include a general revision of the instrument, the verification of the electronic functions, the alignment of the axis X,Y, Z and the calibration of the same.
006 Theodolites Certification Service
190,00€ IVA Escl.
006 Theodolites Certification Service
190,00€ IVA Escl.
The operations include a general revision the instrument, an electronic and mechanical test, the check of the orthogonality between the telescope and the alidade axis, the verification of the transit error using a four Pentax collimators. The operation also include the calibration of levels, the...
012 Nivcomp Digital Levels Certification Service
90,00€ IVA Escl.
012 Nivcomp Digital Levels Certification Service
90,00€ IVA Escl.
The operations include a mechanical and electronic verification of instrument. The tube is checked in all its length to verify the absence of air bubbles. As italian Dirotec dealer, for the models Nivcomp is also possible to remove the air bubbles through the tools and...
